| |
Computational Fluid Dynamics |
 |
MacNeill, R.A., Holmes, S., and Lee H.S., "Measurement of the Aerodynamic Pressures Produced by Passing Trains", Proceedings of: JRC2002, The 2002 ASME/IEEE Joint Rail Conference, Washington D.C., April 23-25, 2002. |
| |
Technical Reports |
 |
Kirkpatrick, S. W., R. T. Bocchieri, and R. MacNeill, "Analysis of a High-Speed Penetrator Impacting a Concrete Target Using the LS-DYNA Finite Element Code", ARA Technical Report, Project 5707, May 2003. |
|
Kirkpatrick, S. W., R. T. Bocchieri, "Finite Element Analysis of the LifeNet SoftWalls Barrier Concept," ARA Final Report, Project 5603 for McMurry & Talbott, Attorneys at Law, May 2003. |
|
B. S. Holmes, R. T. Bocchieri and P. Dunn, "Development and Implementation of Non-linear Plate Response Algorithms into the BEAMS/ABLE Computer Code", ARA Technical Report, Project 0689 for the U.S. Army Research Laboratory, Contract DAAD13-01-D-0001, September 2002. |
|
Holmes, B. S., S. W. Kirk patrick, and R. MacNeill, R. T. Bocchieri, "Space Based Laser Lethality and Target Hardening Support for BMDO," ARA Technical Report, Project 0724 for BMDO/DE, September 2002. |
|
R.W. Klopp, S.W. Kirkpatrick, and D.A. Shockey, "Damage Assessment of Tank Cars Involved in Accidents: Phase II - Modeling and Validation", Final Report, June, 1999. |
|
S.W. Kirkpatrick and T.H. Antoun, "Development and Validation of a Vehicle Crash Model for the 1997 Ford Crown Victoria". Final Report, April, 1999. |
|
S.W. Kirkpatrick, "Damage and Failure behavior of Metal Matrix Composites Under Biaxial Loads", Ph.D. Thesis, Stanford University, January, 1999. |
|
J.D. Colton, S.W. Kirkpatrick, and T. Cooper, "Experiments and Calculations in Support of Code Development for Engineering Lethality", Final Report, December, 1998. |
|
J.D. Colton, P.R. Gefken, D.C. Erlich, S.W. Kirkpatrick, and R.W. Klopp, "Further Development of Load-Damage Relationships for Chemical Submunitions", Final Report, December, 1997. |
|
R.W. Klopp, S.W. Kirkpatrick, and D.A. Shockey," Damage Assessment of Tank Cars Involved in Accidents: Phase II - Modeling and Validation", Final Report, December, 1997. |
|
S.W. Kirkpatrick, T.H. Antoun, and J.W. Simons," Development of a DYNA3D Crash Model for the 1997 Ford Crown Victoria", Final Report, December, 1997. |
|
J.W. Simons and S.W. Kirkpatrick, "Risk assessment for High-Speed Train Derailment: Detailed Finite Element Model of a Train Car", Technical Report, February, 1997. |
|
S.W. Kirkpatrick, and J.W. Simons, "Hazard Risk of High-Speed Train Derailment: Modeling Train Set Derailment on an Elevated Guideway", Technical Report, 1996. |
|
S.W. Kirkpatrick and J.W. Simons, "Computational and Graphical Methods for Impact Analyses", Final Technical Report, 1996. |
|
M. Snyder, D. Allen, S.W. Kirkpatrick, J.W. Simons, W. Peacock and K. Spezzaferro, "Case Studies in Collision Safety", Technical Report, 1996. |
|
J.W. Simons and S.W. Kirkpatrick, "High-Speed Rail Collision Safety: Crashworthiness and Accident Survivability", Poulter Laboratory Technical Report, 1996. |
|
